How to Make Soap: Ingredients, Safety, and More (2024)

Download Article

Explore this Article

parts

Ingredients

1Preparing to Make Cold Process Soap

2Mixing the Ingredients

3Pouring the Soap

4Curing the Soap

+Show 1 more...

-Show less...

Other Sections

Video

Tips and Warnings

Things You'll Need

Related Articles

References

Article Summary

Co-authored bySusan Stocker

Last Updated: May 27, 2024Approved

Download Article

Making soap at home is a satisfying, inexpensive way to provide for your family's needs or create wonderful gifts for your friends. You can make soap using a kit, but making it from scratch enables you to choose your own ingredients and customize the soap to fit your needs. This article provides information on making soap from scratch using the cold process method.

Ingredients

  • 24 ounces of coconut/olive oil
  • 38 ounces of vegetable shortening
  • 12 ounces sodium hydroxide, or lye. (also called caustic soda)
  • 32 ounces spring or distilled water
  • 4 ounces of your favorite essential oil, such as peppermint, lemon, rose or lavender

Part 1

Part 1 of 4:

Preparing to Make Cold Process Soap

Download Article

  1. 1

    Gather the ingredients. Cold process soap is made from oils, lye, and water. When these ingredients are combined at the right temperature, they harden into soap in a process called saponification. Go to your local craft store and grocery store to purchase the ingredients listed.[1]

  2. 2

    Set up your soap-making workspace. It's easiest to clear a space in the kitchen since you'll need to heat the ingredients over the stove. You'll be working with lye, a dangerous chemical, so make sure children and pets are not underfoot while you work.[2] Spread newspaper over a table and assemble the following equipment, which can be sourced online or from your local craft store:

    • Safety goggles and rubber gloves, to protect you from the lye.
    • A scale to weigh the ingredients.
    • A large stainless steel or enamel kettle. Do not use aluminum, and do not use a pot lined with a non-stick surface.
    • A glass or plastic wide-mouth pitcher, to hold the water and lye.
    • A two-cup plastic or glass measuring cup.
    • Plastic or wooden spoons.
    • A stick blender, also called an immersion blender. This isn't absolutely necessary, but it reduces stirring time by about an hour.
    • Two glass thermometers that register between 80-100 degrees F. Candy thermometers work well for this purpose.
    • Plastic molds that are suitable for cold process soapmaking, or shoebox, or a wooden mold. If you use a shoebox or wooden mold, line it with parchment paper.
    • Multiple towels for cleanup.

    Advertisement

  3. 3

    Read up on how to work with lye safely. Before you start the soap-making process, read the safety warnings that came on your box of lye. Keep the following in mind as you handle lye or raw soap before it has been cured:[3]

    • Lye should never touch your skin, as it will burn you.
    • Wear safety goggles and glove at all times while handling lye and raw soap.
    • Work with lye outside or in a well-ventilated area to avoid breathing in fumes.
  4. Advertisement

Part 2

Part 2 of 4:

Mixing the Ingredients

Download Article

  1. 1

    Measure 12 ounces of lye. Make sure that all of your ingredients are exactly the measurement that it is supposed to be, especially on smaller batches. Use the scale to make sure the measurement is exact, and pour the lye into the two-cup measuring cup.

  2. 2

    Measure 32 ounces of cold water. Use the scale to make sure the measurement is exact, and pour the water into a large, non-aluminum container, such as a stainless steel pot or glass bowl. Use distilled water for the best consistency.

  3. 3

    Add the lye to the water. Place the container of water under your stove's running exhaust fan, or make sure the windows are open and the room is well-ventilated. Add the lye to the water slowly, stirring gently with a spoon until the lye is completely dissolved.

    • It is very important to add the lye to the water and not the other way around; if you add the water to the lye, the reaction between the two substances is too quick, and may be dangerous.
    • As you add the lye to the water, it will heat the water and release fumes. Keep your face turned away to avoid inhaling the fumes.
    • Set the mixture aside. Allow it to cool and let the fumes dissipate.
  4. 4

    Measure the oils. Use the scale to weigh out 24 ounces of coconut oil, 38 ounces of vegetable shortening, and 24 ounces of olive oil.

  5. 5

    Combine the oils. Set a large stainless steel pot on the stove on low-medium heat. Add the coconut oil and vegetable shortening and stir frequently until melted. Add the olive oil and stir until all are completely melted and combined, then remove the pot from heat.

  6. 6

    Measure the temperature of the lye and oils. Use different thermometers for the lye and oils, and continue to monitor their temperatures until the lye reaches 95-98 degrees Fahrenheit (35-36 degrees Celsius) and the oils are at the same or lower temperature.

  7. 7

    Add the lye to the oils. When the two substances have reached the proper temperatures, add the lye in a slow, steady stream to the oils.[4]

    • Stir with a wooden or heat-resistant spoon; do not use metal.
    • You may instead use a stick blender to stir the lye and oils.
    • Continue to mix for about 10-15 minutes until "tracing" occurs; you'll see your spoon leave a visible trace behind it, like one you'd see when making pudding. If you're using a stick blender, this should occur within about 5 minutes.
    • If you don't see tracing within 15 minutes, let the mixture sit for 10-15 minutes before continuing to mix again.
  8. 8

    Add 4 ounces of essential oil once tracing occurs. Some fragrances and essential oils (cinnamon, for example), will cause soap to set quickly, so be ready to pour the soap into molds as soon as you stir in the essential oil.

  9. Advertisement

Part 3

Part 3 of 4:

Pouring the Soap

Download Article

  1. 1

    Pour the soap into your mold. If you are using a shoebox or wooden mold, make sure it is lined with parchment paper.[5] Use an old plastic spatula to scrape out the last bits of soap from the pot to the mold.

    • Be sure you are still wearing gloves and safety goggles during this step since raw soap is caustic and can burn skin.
    • Carefully hold the mold an inch or two above the table and drop it. Do this a few times to work out any air bubbles inside the raw soap.
  2. 2

    Cover the mold. If you're using a shoebox as a mold, put the lid on it and cover with several towels. If you're using a soap mold, tape a piece of cardboard over the top before adding towels.[6]

    • The towels help insulate the soap to allow saponification to occur.
    • Leave the soap covered, undisturbed, and out of air drafts (including the air-conditioner) for 24 hours.
  3. 3

    Check the soap. The soap will go through a gel stage and a heat process during the 24 hours. Uncover the soap and let it sit for another 12 hours, then see what the results are.[7]

    • If you measured accurately and followed the directions, the soap may have a light layer of a white ash-like substance on the top. This is basically harmless and can be scraped away with the edge of an old ruler or metal spatula.
    • If the soap has a deep oily film on top, it cannot be used, because it has separated. This will occur if your measurements were not accurate, you did not stir long enough, or if there is a drastic difference in the temperatures of the lye and oils when they are mixed.
    • If the soap did not set at all, or has white or clear pockets in it, this means it is caustic and cannot be used. This is caused by under-stirring during the soap-making process.
  4. Advertisement

Part 4

Part 4 of 4:

Curing the Soap

Download Article

  1. 1

    Unmold the soap. Turn the box or mold over and allow the soap to fall on a towel or clean surface.[8]

  2. 2

    Cut the soap into bars. You need to use tension to cut soap of this type. You can use a sharp knife, a length of wire with two handles, or heavy nylon string or fishing line.[9]

  3. 3

    Allow the soap to cure. Set the soap on top of parchment paper on a flat surface or a drying rack for two weeks to allow the saponification process to complete and the soap to fully dry. Turn the soap over after two weeks to let it dry on the other side.

  4. 4

    Cure the soap one month. Let the soap sit, exposed to air for at least one month. When the soap has fully cured, use in your home, as you would any store-bought soap, or wrap as a present for your friends. It will keep indefinitely.[10]

  5. Advertisement

Community Q&A

Search

Add New Question

  • Question

    Do you know of a more simplified and less expensive soap making process that I could try?

    How to Make Soap: Ingredients, Safety, and More (25)

    Community Answer

    You could try using Melt-and-Pour soap. It is generally less expensive, and all you have to do is melt the material and pour it into your own mold. There should be more instructions on the actual container.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 14Helpful 63

  • Question

    What is saponification?

    How to Make Soap: Ingredients, Safety, and More (26)

    Community Answer

    This is the reaction where a triglyceride undergoes a nucleophilic substitution reaction with a hydroxide to create three soap molecules and a glycerol.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 22Helpful 71

  • Question

    I'm concerned about the advice regarding a batch of soap that cannot be used. Is there a way to neutralize the batch before sending it down the drain so that it's not someone else's problem?

    White vinegar can be used to neutralize the lye in the soap, and soap makers usually keep a large bottle of it at hand while making the soap to neutralize any lye spills too.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 13Helpful 54

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Video

      Tips

      • Lye can be found in the plumbing section of most hardware store or purchased online. Make sure the package says it is 100% sodium hydroxide.

        Thanks

        Helpful5Not Helpful0

      • Don't this without permission from a parent or guardian! If not, you could get in trouble.

        Thanks

        Helpful4Not Helpful0

      • Temperature is crucial when mixing the oils with the lye. If they are too hot, they will separate; if they are too cool, they won't turn into soap.

        Thanks

        Helpful1Not Helpful1

      Show More Tips

      Tips from our Readers How to Make Soap: Ingredients, Safety, and More (28)

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

      • Clean all the equipment and utensils you're going to use with warm soapy water before you start making soap.
      • Don't use food coloring dye. I tried making soap with it and the end result did not turn out.
      • Perfume is not good in soap. It can cause the skin to dry, so use essential oils.

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Name

      Please provide your name and last initial

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      Warnings

      • Tools that are used for soap-making must only be used for soap-making. Do not re-use them in the kitchen or around food. Be cautious when using wooden implements since they are porous and can suffer splintering when used repeatedly for soap-making. Do not use whisks since they have many places caustic substance can get stuck and linger.

        Thanks

        Helpful28Not Helpful7

      • When mixing chemicals like lye with water, always add the chemical to the water, and not the water to the chemical in order to reduce the risk of the chemical splashing up and out.

        Thanks

        Helpful26Not Helpful7

      • Lye (Sodium Hydroxide) is a harsh base and can be extremely dangerous. Avoid skin and eye contact. If you get skin contact, flush with water (after flushing with water you can add vinegar to help neutralize the burn) and seek medical attention. If you get eye contact, flush with cool water for 15-20 minutes and seek medical attention. Use an eye wash center or eye flush bottles if available. If swallowed, contact a poison control center.

        Thanks

        Helpful26Not Helpful9

      • Wear rubber gloves and safety goggles when working with lye. Do not leave lye in reach of children and animals.

        Thanks

        Helpful2Not Helpful1

      • After the soap has set in a mold, if there are small white lumps in the soap, the soap is caustic and must be disposed of safely. The white lumps are lye. To dispose of this contaminated batch, neutralize the lye with vinegar. Submerse the soap bar in water and break up the soap either with gloved hands or something you can use to tear apart the soap to smaller pieces. The soap-vinegar mixture can be disposed of down the drain.

        Thanks

        Helpful1Not Helpful0

      Advertisement

      Things You'll Need

      • Oils:
        • 24 ounces olive oil (not extra virgin)
        • 24 ounces coconut oil
        • 38 ounces vegetable shortening
      • Alkaline Solution:
        • 12 ounces lye
        • 32 ounces spring or distilled water
      • Fragrance or essential oil
        • 4 ounces of your favorite fragrance
      • Equipment:
        • Safety goggles
        • Rubber gloves
        • Apron
        • Scale to weigh the ingredients
        • Large stainless steel or enamel kettle; not aluminum, and not lined with a non-stick surface
        • Glass or plastic wide-mouth pitcher to hold water and lye
        • Two-cup plastic or glass measuring cup
        • Plastic or wooden spoons
        • Stick blender (optional)
        • Two glass thermometers that registers between 80-100 degrees F
        • Plastic molds that are marked suitable for cold process soapmaking, or a plastic shoebox, or a wooden mold.
        • Parchment paper
        • Multiple towels
      • A source of running water and vinegar, in case of contact with lye.

      You Might Also Like

      How toMake Virgin Coconut OilHow toMake Lye
      How toMake a RainbowHow toMake Cold PorcelainHow to Make a Soap Bar at Home without Handling LyeHow toMelt a Soap BarA Guide to Making Vegetable Glycerin At HomeHow to Make Natural Organic Soap: A Beginner-Friendly DIYHow toMake GlycerinHow toMake Ash SoapHow toMake Handmade SoapHow toCut SoapHow toMake Liquid Castile SoapHow toMake Glycerin Soap

      Advertisement

      More References (2)

      About This Article

      How to Make Soap: Ingredients, Safety, and More (38)

      Co-authored by:

      Susan Stocker

      Professional Cleaner

      This article was co-authored by Susan Stocker. Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices. This article has been viewed 1,348,021 times.

      9 votes - 89%

      Co-authors: 82

      Updated: May 27, 2024

      Views:1,348,021

      Categories: Soap Making

      Article SummaryX

      To make your own soap, put on protective gloves and eyewear, then carefully stir lye into a pot of cold water, making sure not to inhale the fumes. Allow the mixture to cool, then heat coconut oil and vegetable shortening in a pot on low-medium heat until they are melted. Add olive oil and stir until everything is combined, then pour it into the lye, stirring with a wooden spoon or a stick blender for about 10-15 minutes. Add your essential oils, then pour the soap into molds. For tips on pouring the soap, keep reading!

      Did this summary help you?

      In other languages

      Spanish

      German

      Dutch

      French

      Russian

      Chinese

      Indonesian

      Arabic

      Hindi

      Thai

      Korean

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 1,348,021 times.

      Reader Success Stories

      • How to Make Soap: Ingredients, Safety, and More (39)

        Ty Ojo-Idowu

        May 3, 2017

        "It's so amazing how you guys at wikiHow work, you're helping lots of people worldwide. Your article on..." more

      More reader storiesHide reader stories

      Did this article help you?

      Advertisement

      How to Make Soap: Ingredients, Safety, and More (2024)
      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Catherine Tremblay

      Last Updated:

      Views: 5573

      Rating: 4.7 / 5 (47 voted)

      Reviews: 94% of readers found this page helpful

      Author information

      Name: Catherine Tremblay

      Birthday: 1999-09-23

      Address: Suite 461 73643 Sherril Loaf, Dickinsonland, AZ 47941-2379

      Phone: +2678139151039

      Job: International Administration Supervisor

      Hobby: Dowsing, Snowboarding, Rowing, Beekeeping, Calligraphy, Shooting, Air sports

      Introduction: My name is Catherine Tremblay, I am a precious, perfect, tasty, enthusiastic, inexpensive, vast, kind person who loves writing and wants to share my knowledge and understanding with you.